AMGP  -  01S   F  -  110
     ①                    ②       ③          ④ 

 

① ARYUNG Motor Gear pump
② Pump Type
③ Level Gauge
No mark: none; F: built-in
④Voltage (V)

 

√ AMGP-01S includes an analog timer control system for intermittent oil delivery and is used with proportional distribution valves.

√ The rotary analog timer makes interval and discharge settings convenient and accurate, delivering the required quantity of oil at the required time.

√ LEDs on the front control panel indicate operating conditions and make abnormalities easy to identify.

√ An optional low-level alarm can be connected to an external controller.

√ The front FEED button makes it easy to purge air from piping and allows manual oil delivery.

√ Suitable for machine tools, printing, food processing, textile and injection molding equipment and other industrial machinery.

 

PUMP SPEC’

Model	Discharge Flow cc	Stop Time Min	Operating Pressure MPa	Tank Capacity ℓ	Operating Viscosity cSt	Discharge Port PT	Weight kg	Phase 1Ø, Poles 2P
								Motor Power W	Frequency Hz	Voltage V	Current A
01S 01SF	3 ~ 85	1 ~ 120	0.8	1.8	30 ~ 220	1/8"(Ø4)	2.8	15	50	100/200	1.4/0.7
									60	110/220	1.2/0.6

 

Controller Panel

① Interval Time LED
② Oil Level down alarm
③ Discharge Time LED
④ FEED Button (Oil Manual Supply)
⑤ Interval time Volume
⑥ Discharge time Volume

 

Circuit Diagram

AMGP-01S(F) — Proportional Type



Wiring Diagram


①② : POWER
 ※  1 : RED      2 : BLACK

 FLOAT S/W OPTION
 ①② : POWER
 ③④ : OIL ALARM
 ※ 1 : RED   2 : BLACK
     3 : WHITE   4 : GREEN

Minimum Time Setting Conditions

Discharge Time	Intermittent Stop Time
1 ～ 10sec sec	About 2min or more
11 ～ 30sec sec	About 3min or more
31 ～ 60sec sec	About 5min or more
61 ～ 99sec sec	About 10min or more

The pump generates heat during operation. Set intervals according to the table. If the interval is too short relative to discharge time, the internal safety device detects excessive motor temperature and stops the motor automatically. Operation resumes after cooling.

Outline Drawing

AMGP-01S(F)

 

 

Applications

· Fluid:Oils
· Recommended Fluid:Winter: 32 cSt or lower
Summer: 68 cSt or lower
· Materials
Control box and cover: plastic
Tank: plastic
Gear pump: steel
Shaft: plastic / ZnDC
· Operating Temperature:Below 80°C
· Lubrication Method:Proportional Type
· Control Method: Analog type
· Level Sensor:FS-A (optional)
· Fuse:0.3A