AMGP-025N A-RYUNG · Korea
Built-in analog timer control system for use with proportional distribution valves. The vibration-resistant construction provides durability even on machines with severe vibration.
AMGP - 025N - ST - 110
① ② ③ ④
① ARYUNG Motor Gear pump
② Pump Type
③ Tank Material
No mark : Plastic, ST : Steel
④Voltage (V)
√ Built-in analog timer control system for use with proportional distribution valves.
√ The vibration-resistant construction provides durability even on machines with severe vibration.
√ A low-level alarm device can be connected to an external controller.
√ The front FEED button makes it easy to purge air from piping and allows manual oil delivery.
√ Suitable for machine tools, printing, food processing, textile and injection molding equipment and other industrial machinery.
PUMP SPEC’
| Model | Discharge Flow cc/min | Stop Time Min | Operating Pressure MPa | Tank Capacity ℓ | Operating Viscosity cSt | Discharge Port PT | Weight kg | Phase 1Ø, Poles 2P | |||
| Motor Power W | Frequency Hz | Voltage V | Current A | ||||||||
| 025N 025N-ST | 3 ~ 60 | 3 ~ 120 | 0.8 | 4.0 | 30 ~ 220 | 1/8"(Ø4) | 4.7 | 15 | 50 | 100/200 | 1.4/0.7 |
| 60 | 110/220 | 1.2/0.6 | |||||||||
Circuit Diagram
AMGP-025N — Proportional Type
Wiring Diagram
①② : POWER
※ 1 : RED 2 : BLACK

FLOAT S/W OPTION
①② : POWER
③④ : OIL ALARM
※ 1 : BLACK 2 : RED
3 : GREEN 4 : WHITE
Minimum Time Setting Conditions
| Discharge Time | Intermittent Stop Time |
| 1 ~ 10sec | About 2min or more |
| 11 ~ 30sec | About 3min or more |
| 31 ~ 60sec | About 5min or more |
| 61 ~ 99sec | About 10min or more |
The pump generates heat during operation. Set intervals according to the table. If the interval is too short relative to discharge time, the internal safety device detects excessive motor temperature and stops the motor automatically. Operation resumes after cooling.
Outline Drawing
AMGP-025N

AMGP-025N-ST

Applications
· Fluid:Oils
· Recommended Fluid:Winter: 32 cSt or lower
Summer: 68 cSt or lower
· Materials
Control box: aluminum
Cover: plastic
Tank: plastic / steel
Gear pump: steel
Shaft: plastic
· Operating Temperature:Below 80°C
· Lubrication Method:Proportional Type
· Control Method: Analog type
· Level Sensor:FS-A (optional)
· Fuse:0.3A
- Previous: AMGP-013(F),015(F) A-RYUNG · Korea
- Next: AMGP-NS A-RYUNG · Korea
Related Products

AMGP-03C,05C A-RYUNG · Korea

AMGP-03,05 A-RYUNG · Korea

AMGP-01N,02N A-RYUNG · Korea

AMGP-200NS A-RYUNG · Korea

AMGP-NS A-RYUNG · Korea

AMGP-025N A-RYUNG · Korea
Related Services / service
Regional Products / city
- Anhui — AMGP-025N A-RYUNG · Korea
- Beijing — AMGP-025N A-RYUNG · Korea
- Chongqing — AMGP-025N A-RYUNG · Korea
- Fujian — AMGP-025N A-RYUNG · Korea
- Gansu — AMGP-025N A-RYUNG · Korea
- Guangdong — AMGP-025N A-RYUNG · Korea
- Guangxi — AMGP-025N A-RYUNG · Korea
- Guizhou — AMGP-025N A-RYUNG · Korea
- Hainan — AMGP-025N A-RYUNG · Korea
- Hebei — AMGP-025N A-RYUNG · Korea



