CPV Standard Proportional Fitting (M8 × M8)
Use with a resistance-type lubricator.
Use with a straight-through distributor.
Suitable oil.
1. Metering fittings can be used with resistance-type lubricators and the following six distributors: A type, AE type, B type, CB type, AE grease distributors with single top/bottom ports, and BB automotive grease distributors.
2. Different flow ratios can be combined to reduce flow differences between lubrication points.
3. Flow through proportional fittings increases in multiples of the smallest flow ratio. Under the same operating conditions, CPS-3 flow is approximately twice CPS-2 flow, while ST-2 flow is approximately four times ST-0 flow.
4. Use clean oil to prevent contaminants accumulating inside the metering fitting and reducing or blocking oil delivery.
 |  |  |  |
 |  |  |  |
◆ Specifications and outline dimensions.
| Model | Oil inlet male thread. | Oil outlet male thread. | Compatible lubricator. | Applicable Oil Viscosity | Flow-ratio code. | Flow ratio. | Internal structure. | Backflow prevention. | Net weight (g). | |
| CPS | M8xP1.0 | PT1/8 | Resistance-type Grease Lubricators | NLGI 000~0 | 1 2 3 4 5 | 〔1〕 〔2〕 〔4〕 〔8〕 〔16〕 | Less ↑ Oil quantity ↓ More | Helical thread. | X | 10 |
| CPB | M8xP1.0 | M8xP1.0 | Resistance-type Oil Lubricators | 32~90 cSt@40℃ | 9 | |||||
| PTT | PT1/8 | PT1/8 | ○ | 10 | ||||||
| CPT | M8xP1.0 | PT1/8 | 10 | |||||||
| CPV standard. | M8xP1.0 | M8xP1.0 | 9 | |||||||
| CPV pointed tip. | M8xP1.0 | M8xP1.0 | 9 | |||||||
| ST | M8xP1.0 | PT1/8 | Resistance-type Oil Lubricators | 32~90 cSt@40℃ | 0 1 2 3 4 5 | 〔2〕 〔4〕 〔8〕 〔16〕 〔32〕 〔64〕 | Less ↑ Oil quantity ↓ More | Flow orifice | ○ | 9 |
| SS | M8xP1.0 | M8xP1.0 | 8 | |||||||
◆ Ordering codes: CPS, CPB, PTT, CPT and CPV.
| Model | Flow ratio. | Special Requirements | ||
| CPS | 1 | ※ | ||
| CPB | 1 | 〔1〕 | S | Add a sleeve and nut set. |
| PTT | 2 | 〔2〕 | ||
| CPT | 3 | 〔4〕 | ||
| CPV standard. | 4 | 〔8〕 | ||
| CPV pointed tip. | 5 | 〔16〕 | ||
Recommended Compatible Products
- Previous: CPV Tapered-nozzle Proportional Fitting (M8 × M8)
- Next: CPT Proportional Fittings (M8xPT1/8)
Related Products
CPS Proportional Fittings (M8xPT1/8)
CPB Proportional Fittings (M8xM8)
PTT Proportional Fittings (PT1/8xPT1/8)
CPT Proportional Fittings (M8xPT1/8)
CPV Standard Proportional Fitting (M8 × M8)
CPV Tapered-nozzle Proportional Fitting (M8 × M8)
Related Services / service
Regional Products / city
- Anhui — CPV Standard Proportional Fitting (M8 × M8)
- Beijing — CPV Standard Proportional Fitting (M8 × M8)
- Chongqing — CPV Standard Proportional Fitting (M8 × M8)
- Fujian — CPV Standard Proportional Fitting (M8 × M8)
- Gansu — CPV Standard Proportional Fitting (M8 × M8)
- Guangdong — CPV Standard Proportional Fitting (M8 × M8)
- Guangxi — CPV Standard Proportional Fitting (M8 × M8)
- Guizhou — CPV Standard Proportional Fitting (M8 × M8)
- Hainan — CPV Standard Proportional Fitting (M8 × M8)
- Hebei — CPV Standard Proportional Fitting (M8 × M8)
