1. Operation and interval times are PLC-controlled.

2. Use with a CFB volumetric grease distributor for metered delivery.

3. Includes a pressure gauge for checking operating pressure.

4. A manual lubrication button provides forced lubrication.

5. An optional 60 kgf/cm² pressure switch detects damage to the lubrication lines.

6. An optional reed-switch oil-level detector can monitor level and send a signal automatically.

7. Fill the KAB reservoir through the grease nipple to prevent air and foreign matter from entering.

8. KABP-07 must be used with a 700 cc bellows-type grease cartridge. Replace the empty cartridge without time-consuming refilling. Cartridges are sold separately; refer to the bellows-type grease cartridge ordering codes.

9. Refer to the diaphragm pressure switch specifications for contact information.

◆ Dimensions

◆ Specifications

Reed-type oil level sensor contacts: NO sends a signal when oil is present; NC sends a signal when oil is absent.

◆ Wiring Diagram

M: Motor GND: Ground DK: forced lubrication button. DS: pressure switch (optional). WS: magnetic reed oil-level detector (optional). Connect PLC: connection to PLC. Power Load

◆ Ordering Code

Recommended Compatible Products