1. Operation and interval times are PLC-controlled.
2. Includes a pressure gauge for checking operating pressure.
3. Includes a forced-feed button for manual lubrication.
4. An optional 60 kgf/cm² pressure switch detects oil line damage.
5. An optional reed-type oil level sensor detects the oil level and signals automatically.
6. Fill KAC models through the grease nipple to prevent air and foreign matter entering the reservoir.
7. KACP-07 uses a 700 cc bellows grease cartridge. Replace the empty cartridge without time-consuming refilling. Cartridges are sold separately; refer to the bellows grease cartridge ordering codes.
8. Refer to the diaphragm pressure switch specifications for contact information.
◆ Dimensions
| Model | Reservoir capacity. | Length L (mm) | Width W (mm) | Height H (mm) | Mounting hole pitch F (mm) | Weight (kg) |
| KAC-40 | 800cc | 172 | 153 | 338 | 104 | 2.12 |
| KAC-35 | 1000cc | 176 | 295 | 2.21 | ||
| KAC-50 | 2000cc | 183 | 379 | 2.55 |
◆ Specifications
| Motor Output Power | 13±12% |
| Voltage | DC24V |
| Voltage | 1.4A |
| Maximum Discharge Rate | 10cc/min |
| Maximum Discharge Pressure | 100kgf/c㎡ |
| Oil Outlet Size | Ø6, Ø8 |
| Reed-type Oil Level Sensor | Optional (NC or NO contact). |
| Pressure Switch | Optional (NC or NO contact). |
| Applicable Oil Viscosity | NLGI 000~0 |
Reed-type oil level sensor contacts: NO sends a signal when oil is present; NC sends a signal when oil is absent.
◆ Wiring Diagram
| DS: pressure switch (optional). GND: Ground M: motor. DK: forced lubrication button. WS: magnetic reed oil-level detector (optional). Connect PLC: connection to PLC. Power Load |
◆ Ordering Code
| Model | Reservoir capacity. | Voltage | Oil Outlet Size | Special Requirements | ||||
| KAC | 35 | K | 3 | ※ | ||||
| 40 | 800cc | K | DC24V | 1 | Ø6 | PC | Additional pressure switch, NC contact | |
| 35 | 1000cc | 3 | Ø6 (with pressure gauge) | PO | Additional pressure switch, NO contact | |||
| 50 | 2000cc | 4 | Ø8 | RC | Additional reed-type oil level sensor, NC contact | |||
| 5 | Ø8 (with pressure gauge) | RO | Additional reed-type oil level sensor, NO contact | |||||
Recommended Compatible Products


- Previous: KACP Resistance-type Electric Grease Lubricator
- Next: KGV Resistance-type Electric Semi-fluid Grease Lubricator
Related Products

KSC Resistance-type Electric Grease Lubricator

KSCP Heavy-duty Spring Resistance-type Electric Grease Lubricator

KGA Resistance-type Electric Grease Lubricator

KGAP Heavy-duty Spring Resistance-type Electric Grease Lubricator

KGC Resistance-type Electric Grease Lubricator

KGCP Heavy-duty Spring Resistance-type Electric Grease Lubricator
Related Services / service
Regional Products / city
- Anhui — KAC Resistance-type Electric Grease Lubricator
- Beijing — KAC Resistance-type Electric Grease Lubricator
- Chongqing — KAC Resistance-type Electric Grease Lubricator
- Fujian — KAC Resistance-type Electric Grease Lubricator
- Gansu — KAC Resistance-type Electric Grease Lubricator
- Guangdong — KAC Resistance-type Electric Grease Lubricator
- Guangxi — KAC Resistance-type Electric Grease Lubricator
- Guizhou — KAC Resistance-type Electric Grease Lubricator
- Hainan — KAC Resistance-type Electric Grease Lubricator
- Hebei — KAC Resistance-type Electric Grease Lubricator




