Welcome to Suzhou Weidoya — Industrial Lubrication, Cooling & Instrumentation

20 Years of Specialist Sales & Technical Experience

A-RYUNG · KYTOLA · Autonics · CHEN YING · Sensorik Austria

Specialist provider of lubrication and cooling systems

International Sales

+86 153 6620 7892
Home / Products / CHEN YING Lubricators · Taiwan, China / Resistance-type Grease Lubricators / Electric PLC-controlled Series
KAC Resistance-type Electric Grease Lubricator

KAC Resistance-type Electric Grease Lubricator

Non-metered lubrication.

PLC-controlled.


Inquiry

1. Operation and interval times are PLC-controlled.

2. Includes a pressure gauge for checking operating pressure.

3. Includes a forced-feed button for manual lubrication.

4. An optional 60 kgf/cm² pressure switch detects oil line damage.

5. An optional reed-type oil level sensor detects the oil level and signals automatically.

6. Fill KAC models through the grease nipple to prevent air and foreign matter entering the reservoir.

7. KACP-07 uses a 700 cc bellows grease cartridge. Replace the empty cartridge without time-consuming refilling. Cartridges are sold separately; refer to the bellows grease cartridge ordering codes.

8. Refer to the diaphragm pressure switch specifications for contact information.

kac — Dimensional drawing


◆ Dimensions

ModelReservoir capacity.Length L (mm)Width W (mm)Height H (mm)Mounting hole pitch F (mm)Weight (kg)
KAC-40800cc1721533381042.12
KAC-351000cc1762952.21
KAC-502000cc1833792.55



◆ Specifications

Motor Output Power13±12%
VoltageDC24V
Voltage1.4A
Maximum Discharge Rate10cc/min
Maximum Discharge Pressure100kgf/c㎡
Oil Outlet SizeØ6, Ø8
Reed-type Oil Level SensorOptional (NC or NO contact).
Pressure SwitchOptional (NC or NO contact).
Applicable Oil ViscosityNLGI 000~0


Reed-type oil level sensor contacts: NO sends a signal when oil is present; NC sends a signal when oil is absent.


◆ Wiring Diagram

kac  — Wiring diagramDS: pressure switch (optional).
GND: Ground
M: motor.
DK: forced lubrication button.
WS: magnetic reed oil-level detector (optional).
Connect PLC: connection to PLC.
Power
Load



◆ Ordering Code

ModelReservoir capacity.VoltageOil Outlet SizeSpecial Requirements
KAC35K3※

40800ccKDC24V1Ø6PCAdditional pressure switch, NC contact

351000cc

3Ø6 (with pressure gauge)POAdditional pressure switch, NO contact

502000cc

4Ø8RCAdditional reed-type oil level sensor, NC contact





5Ø8 (with pressure gauge)ROAdditional reed-type oil level sensor, NO contact

Recommended Compatible Products

11111.png2222.png


Related Products

WhatsApp