1. Precise oil delivery: select the required quantity for each lubrication point.

2. Use with a pressure-relief oil lubricator. Oil is discharged synchronously during each motor interval.

3. An indicator rod at each outlet allows visual inspection of operation. An optional proximity switch or microswitch converts rod movement into an electrical signal.

4. The standard proximity switch has a normally closed (NC) contact and outputs a signal when no indicator-rod movement is detected. A normally open (NO) contact is also available; specify when ordering.

5. A microswitch can only be fitted to an outlet with a 0.5cc discharge volume. It can be configured for an NO contact that signals during motor operation, an NC contact that signals during the interval, or both.

6. Two outlet types are available: (1) standard tubing and sleeve-cap connection; (2) push-in connection.

7. Quick-connect fittings are recommended for N-12 nylon tubing. Refer to the illustration below for installation and removal instructions.