A PLC controls lubrication and interval times.

A pressure gauge monitors operating pressure.

Single-phase 110V, single-phase 220V and DC24V models include a manual lubrication button. Do not hold it down for more than 3 minutes, to prevent motor overload.

Single-phase 110V and single-phase 220V models include motor thermal protection. At 100°C, the motor stops temporarily for approximately 5 minutes.

An optional 60kgf/cm² pressure switch detects damage to the lubrication lines.

An optional reed-switch oil-level detector monitors level and sends a signal automatically.

Fill the KGC and KGCP-50 reservoirs through the grease nipple to prevent air and foreign matter from entering.

The KGCP-07 uses a 700cc bellows-type grease cartridge. Replace the cartridge when empty, avoiding time-consuming refilling. Grease cartridges are sold separately.