SCM-US48I USB-to-RS485 communication converter.

• Converts and transmits signals between USB and RS485 devices over distances up to 1.2 km.

• The RS485 transceiver provides electrical isolation between USB and RS485 (2500 Vrms).

• Built-in surge protection circuit.

• The bus is powered by the USB host controller.

• USB 2.0 type A–B cable with a noise-suppressing ferrite bead.

• Compatible with USB 1.1 and USB 2.0 host controllers.

SCM-38I RS232C-to-RS485 communication converter.

• Converts and transmits signals between RS232C and RS485 devices over distances up to 1.2 km.

• Built-in surge protection circuit.

• Isolated signal lines (RS232C and RS485).

• Tx enable signal.

SCM-US / SCM-USP / SCM-SFL USB-to-serial communication converters.

※ Four-pin connector models have been added to the product lineup.

• USB: USB 2.0 Type A (4-pin male connector for communication)

• Simple connection between the device and a PC.

• USB cable with noise-suppression ferrite bead.

• Built-in protection circuit.

• Non-isolated type.

• LED operating indicators for data transmission and power.

• Compatible with USB 1.1 and USB 2.0 host controllers.

• Designed specifically for Autonics products with a PC loader port.

SCM-USU2I dual-channel USB temperature data logger.

• Transfer two channels of real-time temperature data to a PC.

• DAQMaster integrated device-management software records and monitors temperature.

• USB-powered device with USB communication interface (Modbus RTU).

• Supports thermocouple, RTD, mA and voltage inputs; different sensors can be assigned to each channel.

• Fast 50 ms sampling rate (two-channel synchronous sampling).

• Plug-and-socket terminals simplify wiring.

• Compact, space-saving design: W 45 × H 25.3 × L 75 mm.

• DIN-rail or screw mounting.

•