CLHA-25 Resistance-type Manual Grease Lubricator (Grease Cartridge)-Manual Series-Suzhou Weidoya Automation Electrical Equipment Co., Ltd.-Lubrication, Cooling & Intelligent Sensing

Non-metered lubrication.

Manual control.

1. Pull the handle to deliver lubricating oil; operation is simple.

2. Oil outlets can be positioned on the left, right or both sides of the handle as required.

3. Uses a 400 cc grease cartridge. Replace the empty cartridge without time-consuming refilling. Cartridges are sold separately.

4. A protective sleeve helps prevent external forces from damaging the grease cartridge.

5. Suitable for machinery with irregular lubrication intervals, such as punch presses and woodworking machines.

◆ Specifications and outline dimensions.

Model	Effective Capacity	Length L (mm)	Width W (mm)	Height H (mm)	Mounting hole pitch F (mm)	Maximum Discharge Rate	Maximum Discharge Pressure	Oil Outlet Size	Applicable Oil Viscosity	Weight (kg)
CLHA-25	400 cc (grease cartridge).	134	96	385	70x75	2cc per stroke	100 kgf/c㎡	Ø4 Ø6 Ø8 PT1/8	NLGI 0, 1	1.06

◆ Ordering Code

Model	Oil outlet.		Oil outlet fitting.		Oil Outlet Size		Grease cartridge thread pitch.		Special Requirements
CLHA-25	R		D		1		A		※
	L	Left	D	Straight fitting.	0	Ø4	A	M15xP2.5	T0	Optional NLGI grade 0 grease cartridge.
	R	Right	H	Right-angle fitting.	1	Ø6	B	M15xP2.0	T1	Optional NLGI grade 1 grease cartridge.
	D	Dual outlet.			2	Ø4 (with pressure gauge)
					3	Ø6 (with pressure gauge)
					4	Ø8
					5	Ø8 (with pressure gauge)
					6	PT1/8
					7	PT1/8 (with pressure gauge)

※ The grease cartridge is suitable only for CLHA-25 lubricators with an M15 × P2.5 cartridge thread.

Recommended Compatible Products

Related Tags: