Push-in Straight Connector-Fittings-Suzhou Weidoya Automation Electrical Equipment Co., Ltd.-Lubrication, Cooling & Intelligent Sensing

1. Well-designed and easy to use; connecting and disconnecting oil tubing saves time and effort.

2. Whereas commercially available push-in connectors generally withstand less than 15 kgf/cm², this product withstands pressures up to 60 kgf/cm².

3. Recommended for nylon tubing, especially N-12 material, and rubber hose.

4. Suitable for conveying gas, oil and grease. The product contains rubber and must not be used with liquids that damage rubber.

◆ Installation and removal of straight push-in fittings.

Mounting method.		Removal method.
	1. First check that the tubing end is cut square.		1. Press the quick-connect fitting with index finger and thumb to open the collet.
	2. Push the tubing all the way in until two clicks are heard.		2. With the other hand, push the tube inward, then pull it out while rotating it approximately 90°.
	3. Pull the oil tube by hand to check that it cannot come loose.