1. Operation and interval times are timer-controlled. The control box has ACT, ALM, RUN and INT indicators and a built-in small buzzer.
2. Use with positive-displacement distributors for metered oil delivery.
3. Stores the configured operation and interval times.
4. Includes a pressure gauge for checking operating pressure.
5. Includes a float switch for oil level detection and automatic signaling.
6. Includes a pressure regulating valve for pressure adjustment.
7. Models with tanks of 3 L or more include an 8 kgf/cm² pressure switch to detect oil line damage.
8. Includes a manual forced-feed button (F button).
9. A special alloy steel gear pump with an induction motor provides stable pressure and consistent lubricant supply to each point, with quiet operation and a long service life, meeting the needs of general large machinery.
10. Refer to the float / float switch specifications for contact information.
11. Refer to the diaphragm pressure switch specifications for contact information.
◆ Dimensions
| Motor Output Power | Tank Capacity | Tank Material | Length L (mm) | Width W (mm) | Height H (mm) | Mounting hole pitch F (mm) | Weight (kg) |
| 25W | 2L | Aluminum alloy | 222 | 167 | 245 | 95x200 | 5.81 |
| 3L | Resin | 230 | 170 | 254 | 205 | 5.10 | |
| 4L | Resin | 277 | 162 | 266 | 250 | 5.50 | |
| 4L | Aluminum alloy | 297 | 170 | 264 | 95x280 | 6.41 | |
| 8L | Sheet metal | 355 | 201 | 285 | 95x338 | 9.54 | |
| 60W | 4L | Aluminum alloy | 297 | 170 | 311 | 95x280 | 8.15 |
| 8L | Sheet metal | 355 | 201 | 331 | 95x338 | 10.55 |
◆ Specifications
| Operation Time | 1–999 seconds | |||
| Interval Time | 1–999 seconds / 1–999 minutes | |||
| Motor Output Power | 25W | 60W | ||
| Voltage | 110V | 220V | 110V | 220V |
| Current | 0.6A | 0.3A | 1.2A | 0.6A |
| Maximum Discharge Rate | 250cc/min | 500cc/min | ||
| Maximum Discharge Pressure | 20kgf/c㎡ | 30kgf/c㎡ | ||
| Frequency | Compatible with 50 Hz and 60 Hz | |||
| Oil Outlet Size | Ø4 , Ø6 | |||
| Float Switch | NC contact | |||
| Pressure Switch | NC contact | |||
| Applicable Oil Viscosity | 32~68 cSt@40oC (contact customer service for special oil viscosity requirements) | |||
◆ Wiring Diagram
| Fault Output | Ground | Power Supply | |||
| NO(A) | NC(B) | COM | GND(P.E) | POWER | |
| ⊕ | ⊕ | ⊕ | ⊕ | ⊕ | ⊕ |
◆ Ordering Code
| Model | Tank Capacity (Material) | Operating Cycle (Operation × Interval) | Voltage | Motor Output Power | Oil Outlet Size | Special Requirements | ||||||
| CENB | 03 | 2 | C | 25 | 3 | ※ | ||||||
| 02 | 2 L (aluminum alloy) | 1 | Seconds × Seconds | A | 110V | 25 | 25W | 0 | Ø4 | B | Larger buzzer | |
| 03 | 3 L (resin) | 2 | Seconds × Minutes | C | 220V | 60 | 60 W (metal tanks of 4 L or more only) | 1 | Ø6 | |||
| 04 | 4 L (resin) | 90 | 90 W (metal tanks of 4 L or more only) | 2 | Ø4 (with pressure gauge) | |||||||
| 05 | 4 L (aluminum alloy) | 3 | Ø6 (with pressure gauge) | |||||||||
| 08 | 8 L (sheet metal) | |||||||||||
- Previous: None
- Next: CESG04 Pressure-relief Electric Lubricator
Related Products
CEPB Pressure-relief Electric Lubricator (Internal DIP Switches)
CEWB Pressure-relief Electric Lubricator (External Twin Knobs)
CEN04 Pressure-relief Electric Lubricator
CESG04 Pressure-relief Electric Lubricator
CENB Pressure-relief Electric Lubricator
Related Services / service
Regional Products / city
- Anhui — CENB Pressure-relief Electric Lubricator
- Beijing — CENB Pressure-relief Electric Lubricator
- Chongqing — CENB Pressure-relief Electric Lubricator
- Fujian — CENB Pressure-relief Electric Lubricator
- Gansu — CENB Pressure-relief Electric Lubricator
- Guangdong — CENB Pressure-relief Electric Lubricator
- Guangxi — CENB Pressure-relief Electric Lubricator
- Guizhou — CENB Pressure-relief Electric Lubricator
- Hainan — CENB Pressure-relief Electric Lubricator
- Hebei — CENB Pressure-relief Electric Lubricator
