1. Operation and interval times are timer-controlled. The control box includes ACT and INT indicators and a built-in small buzzer.

2. Stores the set lubrication and interval times.

3. Two startup modes are available. The standard mode starts with lubrication: (a) lubrication first—the lubrication timer starts at power-on; (b) interval first—the interval timer starts at power-on.

5. Interval-first models include memory. If power is interrupted during an interval, operation resumes with the remaining interval after restart, avoiding repeated lubrication.

6. Includes a pressure gauge for checking operating pressure.

7. Includes a float switch for oil level detection and automatic signaling.

8. Includes a forced-feed button (F button). Do not hold for more than 3 minutes to avoid motor overload.

9. Includes motor thermal protection. At 100°C, operation stops temporarily for approximately 5 minutes.

10. An optional 1kgf/cm² pressure switch detects damage to the lubrication lines.

11. Refer to the float / float switch specifications for contact information.

12. Refer to the diaphragm pressure switch specifications for contact information.

◆ Dimensions

◆ Specifications

◆ Wiring Diagram

◆ Ordering Code