KGH (High-pressure Type) Resistance-type Electric Grease Lubricator-Electric PLC-controlled Series-Suzhou Weidoya Automation Electrical Equipment Co., Ltd.-Lubrication, Cooling & Intelligent Sensing

KGH (High-pressure Type) Resistance-type Electric Grease Lubricator

Non-metered lubrication.

PLC-controlled.

Inquiry

1. Supports continuous lubrication or PLC-controlled lubrication and interval times.

2. A worm-gear motor supplies oil steadily at pressures up to 300 kgf/cm².

3. An agitator in the reservoir stirs the solid grease.

4. Two grease nipples are provided. Fill the reservoir through the grease nipples to prevent air and foreign matter from entering.

5. A drain hole allows excess grease to escape if filling exceeds the maximum level.

6. An overpressure safety valve releases grease when pressure reaches 250 kgf/cm², preventing excessive pressure.

◆ Dimensions

Reservoir capacity.	Length L (mm)	Width W (mm)	Height H (mm)	Mounting hole pitch F (mm)	Weight (kg)
2000cc	282	183	269	160	8.34

◆ Specifications

Motor Output Power	125W
Voltage	AC110V	AC220V	DC24V
Current	5A
Frequency	Compatible with 50 Hz and 60 Hz		--
Motor wiring.	1 represents −. 2 represents +.
Maximum Discharge Rate	Approximately 5.5 cc/min.
Maximum Discharge Pressure	300kgf/c㎡
Oil Outlet Size	Ø4, Ø6, Ø8, Ø10
Applicable Oil Viscosity	NLGI 000~2

※ AC 110 V and AC 220 V are obtained using an additional transformer.

◆ Wiring Diagram

M: motor.
Power
GND: ground.
Connect PLC: connection to PLC.

◆ Ordering Code

Model	Reservoir capacity.		Number of oil outlets		Voltage		Oil Outlet Size		Special Requirements
KGH	2L		1		K		1		※
	2L	2000cc	1	1 unit	A	Add a transformer for AC 110 V.	0	Ø4 x PT1/4	G	Optional pressure gauge
			2	2 units	C	Add a transformer for AC 220 V.	1	Ø6 x PT1/4	KC	Add a capacitive oil-level detector, PNP, NC contact.
			3	3 units	K	DC24V	2	Ø8 x PT1/4	KO	Add a capacitive oil-level detector, PNP, NO contact.
							3	Ø10 x PT1/4	T	Add a timer.

※ Capacitive oil-level detection contacts: NO provides a signal when oil is present; NC provides a signal when oil is absent. Specify NPN and NC/NO contact requirements when ordering.

Recommended Compatible Products