Welcome to Suzhou Weidoya — Industrial Lubrication, Cooling & Instrumentation

20 Years of Specialist Sales & Technical Experience

A-RYUNG · KYTOLA · Autonics · CHEN YING · Sensorik Austria

Specialist provider of lubrication and cooling systems

International Sales

+86 153 6620 7892
Home / Products / CHEN YING Lubricators · Taiwan, China / Oil-return Lubricators / Electric PLC-controlled Series
CEH Electric Oil-return Lubricator

CEH Electric Oil-return Lubricator

Non-metered lubrication.
PLC-controlled.

Inquiry

1. An oil-return system recirculates lubricating oil, reducing oil consumption.

2. A magnetic strainer at the return port prevents iron particles and other contaminants entering the reservoir, keeping circulating oil clean.

3. A PLC can control lubrication and interval times, or the unit can run continuously for long periods without PLC control.

4. A special alloy-steel gear pump paired with an induction motor provides stable discharge pressure, quiet operation and long service life.

5. A pressure-regulating valve allows discharge pressure to be adjusted as needed.

6. Includes a float switch for oil level detection and automatic signaling.

7. After installation and piping, run continuous forced lubrication to prime the system. Begin normal operation only after the oil lines are completely filled.

8. Refer to the float / float switch specifications for contact information.

CEH  — Dimensional drawing

◆ Dimensions


Motor Output PowerTank CapacityTank MaterialLength L (mm)Width W (mm)Height H (mm)Mounting hole pitch F (mm)Weight (kg)
25W4LAluminum alloy29717025195x2806.85
8LSheet metal35520127195x3389.85
12LSheet metal49522525195x47812.60
60W8LSheet metal35520133395x33811.35
12LSheet metal49522531195x47813.65


◆ Specifications

Motor Output Power25W60W
VoltageSingle-phase 110 VSingle-phase 220 VThree-phase VoltageSingle-phase 110 VSingle-phase 220 VThree-phase Voltage
Current0.6A0.3A0.3A1.2A0.6A0.6A
Maximum Discharge Rate250cc/min500cc/min
Maximum Discharge Pressure15kgf/c㎡30kgf/c㎡
FrequencyCompatible with 50 Hz and 60 Hz.
Oil Outlet SizeØ4 , Ø6
Oil return port size.PT1/2, PT3/4
Float SwitchNC contact (NO contact available)
Applicable Oil Viscosity32–68 cSt at 40°C. Contact customer service about special oil viscosities.


◆ Wiring Diagram




Single-phase VoltageThree-phase Voltage
M: Motor
Power: Power Supply
WS: Float Switch
CEH — Single-phase wiring diagramCEH — Three-phase wiring diagram


When wiring a three-phase supply, check whether motor rotation is reversed (the motor shaft is marked with a red dot). If rotation is incorrect, interchange any two supply wires.


◆ Ordering Code

ModelTank Capacity (Material)VoltageMotor Output PowerOil Outlet SizeOil return port size.Special Requirements
CEH05C253A※

054 L (aluminum alloy)ASingle-phase 110 V2525W0Ø4APT1/2SOFloat switch changed to NO contact

088 L (sheet metal)CSingle-phase 220 V6060 W (only for tanks of 8 L or more).1Ø6BPT3/4


1212 L (sheet metal)DThree-phase 220/380 V9090 W (only for tanks of 8 L or more).2Ø4 (with pressure gauge)




2020 L (sheet metal)EThree-phase 220/440 V

3Ø6 (with pressure gauge)




3030 L (sheet metal)FThree-phase 208/415 V








3636 L (sheet metal)GThree-phase 230/460 V








4040 L (sheet metal)HThree-phase 240/480 V








6060 L (sheet metal)MThree-phase 220 V








6464 L (sheet metal)NThree-phase 380 V








7777 L (sheet metal)XSpecial Voltage








Note: Voltage codes D–H are three-phase dual-voltage models, wired for low voltage as standard. Specify high-voltage wiring when ordering if required.

Recommended Compatible Products

3333.pngCEH oil-return electric lubricator — PLC or continuous lubrication


Related Products

WhatsApp