1. An oil-return system recirculates lubricating oil, reducing oil consumption.
2. A magnetic strainer at the return port prevents iron particles and other contaminants entering the reservoir, keeping circulating oil clean.
3. A PLC can control lubrication and interval times, or the unit can run continuously for long periods without PLC control.
4. A special-alloy steel gear pump paired with a direct-coupled motor provides stable output pressure, quiet operation and a long service life.
5. A pressure-regulating valve allows discharge pressure to be adjusted as needed.
6. Includes a float switch for oil level detection and automatic signaling.
7. A 1kgf/cm² pressure switch detects damage to the lubrication lines.
8. After installation and piping, run continuous forced lubrication to prime the system. Begin normal operation only after the oil lines are completely filled.
9. Refer to the float / float switch specifications for contact information.
10. Refer to the diaphragm pressure switch specifications for contact information.
◆ Dimensions
| Tank Capacity | Tank Material | Length L (mm) | Width W (mm) | Height H (mm) | Mounting hole pitch F (mm) | Weight (kg) |
| 36L | Sheet metal | 410 | 353 | 662 | 300x215 | 46.3 |
| 64L | Sheet metal | 560 | 480 | 662 | 450x300 | 52.5 |
| 77L | Sheet metal | 610 | 480 | 692 | 500x300 | 75.5 |
◆ Specifications
| Motor horsepower. | 1/2HP, 1HP | Number of motor poles. | 4P |
| Voltage | Single-phase 110 V, single-phase 220 V and three-phase voltage. | ||
| Maximum Discharge Rate | CLS-10：1.5 L/min | CLS-30：3.0 L/min | CLS-50：4.5 L/min |
| Maximum Discharge Pressure | 15kgf/c㎡ | ||
| Oil Outlet Size | Ø4 , Ø6 | ||
| Oil return port size. | PT3/4, PT1 | ||
| Float Switch | NC contact (NO contact available) | ||
| Pressure Switch | NC contact (NO contact available) | ||
| Applicable Oil Viscosity | 32–100 cSt at 40°C. Contact customer service about special oil viscosities. | ||
◆ Ordering Code
| Model | Discharge Volume | Tank Capacity (Material) | Voltage | Motor horsepower. | Oil outlet size (PT 1/4). | Oil return port size. | Special Requirements | |||||||
| CLS | 10 | 36 | D | 2 | 3 | C | ※ | |||||||
| 10 | 1.5 L/min | 30 | 30 L (sheet metal) | A | Single-phase 110 V | 2 | 1/2HP | 2 | Ø4 (with pressure gauge) | B | PT3/4 | PO | Pressure switch changed to NO contact | |
| 30 | 3.0 L/min | 36 | 36 L (sheet metal) | C | Single-phase 220 V | 4 | 1HP | 3 | Ø6 (with pressure gauge) | C | PT1 | SO | Float switch changed to NO contact | |
| 50 | 4.5 L/min | 40 | 40 L (sheet metal) | D | Three-phase 220/380 V | |||||||||
| 60 | 60 L (sheet metal) | E | Three-phase 220/440 V | |||||||||||
| 64 | 64 L (sheet metal) | F | Three-phase 208/415 V | |||||||||||
| 77 | 77 L (sheet metal) | G | Three-phase 230/460 V | |||||||||||
| 100 | 100 L (sheet metal) | H | Three-phase 240/480 V | |||||||||||
| 130 | 130 L (sheet metal) | M | Three-phase 220 V | |||||||||||
| 150 | 150 L (sheet metal) | N | Three-phase 380 V | |||||||||||
| 204 | 204 L (sheet metal) | X | Special Voltage | |||||||||||
Note: Voltage codes D–H are three-phase dual-voltage models, wired for low voltage as standard. Specify high-voltage wiring when ordering if required.
Recommended Compatible Products
Related Products
CEH Electric Oil-return Lubricator
CEU Electric Oil-return Lubricator
CLS Electric Oil-return Lubricator
CLSA Electric Oil-return Lubricator
CLSB Electric Oil-return Lubricator
CLST Electric Oil-return Lubricator with Cooling
Related Services / service
Regional Products / city
- Anhui — CLS Electric Oil-return Lubricator
- Beijing — CLS Electric Oil-return Lubricator
- Chongqing — CLS Electric Oil-return Lubricator
- Fujian — CLS Electric Oil-return Lubricator
- Gansu — CLS Electric Oil-return Lubricator
- Guangdong — CLS Electric Oil-return Lubricator
- Guangxi — CLS Electric Oil-return Lubricator
- Guizhou — CLS Electric Oil-return Lubricator
- Hainan — CLS Electric Oil-return Lubricator
- Hebei — CLS Electric Oil-return Lubricator
