1. Operation and interval times are PLC-controlled.
2. Includes a pressure gauge for checking operating pressure.
3. A 1 kgf/cm² pressure switch detects damage in the oil line.
4. Includes a float switch for oil level detection and automatic signaling.
5. A spark suppressor limits interference to the PLC from voltage surges and contact sparks, extending switch life.
6. A forced lubrication button is provided. Do not hold it continuously for more than 3 minutes, to prevent motor overload.
7. Motor thermal protection is provided. At 100°C, the motor stops temporarily for approximately 5 minutes.
8. Refer to the float / float switch specifications for contact information.
9. Refer to the diaphragm pressure switch specifications for contact information.
◆ Dimensions
| Tank Capacity | Tank Material | Long L (mm) | Width W (mm) | Height H (mm) | Mounting hole pitch F (mm) | Weight (kg) |
| 2L | Resin | 213 | 128 | 244 | 177 | 3.40 |
| 2L | Aluminum alloy | 221 | 150 | 234 | 95x200 | 4.55 |
| 3L | Resin | 227 | 167 | 248 | 205 | 3.85 |
| 4L | Resin | 277 | 162 | 259 | 250 | 4.30 |
| 4L | Aluminum alloy | 297 | 170 | 253 | 95x280 | 5.30 |
| 8L | Sheet metal | 355 | 201 | 270 | 95x338 | 7.95 |
◆ Specifications
| Motor Output Power | 30±3W | |
| Voltage | 110V | 220V |
| Current | 2A | 1A |
| Frequency | 60Hz | 50Hz, 60Hz |
| Maximum Discharge Rate | 130 cc/min (260 cc/min also available) | |
| Maximum Discharge Pressure | 15kgf/c㎡ | |
| Oil Outlet Size | Ø4 , Ø6 | |
| Float Switch | NC contact (NO contact available) | |
| Pressure Switch | NC contact (NO contact available) | |
| Applicable oil viscosity. | 32~68 cSt@40oC (contact customer service for special oil viscosity requirements) | |
◆ Wiring Diagram
 | M: Motor |
◆ Ordering Code
| Model | Tank Capacity (Material) | Voltage | Oil Outlet Size | Special Requirements | ||||
| CEN01 | 01 | C | 3 | ※ | ||||
| 01 | 2 L (resin) | A | 110V, 60Hz | 0 | Ø4 | B | Additional buzzer | |
| 02 | 2 L (aluminum alloy) | B | 220V, 50Hz | 1 | Ø6 | PO | Pressure switch changed to NO contact | |
| 03 | 3 L (resin) | C | 220V, 60Hz | 2 | Ø4 (with pressure gauge) | SO | Float switch changed to NO contact | |
| 04 | 4 L (resin) | 3 | Ø6 (with pressure gauge) | Z | Maximum discharge rate 260 cc/min | |||
| 05 | 4 L (aluminum alloy) | |||||||
| 08 | 8 L (sheet metal) | |||||||
Recommended Compatible Products
- Previous: CESG01 Resistance-type Electric Lubricator
- Next: None
Related Products
CEN01 Resistance-type Electric Lubricator CHEN YING
CESG01 Resistance-type Electric Lubricator
CEV Resistance-type Electric Lubricator
Related Services / service
Regional Products / city
- Anhui — CEN01 Resistance-type Electric Lubricator CHEN YING
- Beijing — CEN01 Resistance-type Electric Lubricator CHEN YING
- Chongqing — CEN01 Resistance-type Electric Lubricator CHEN YING
- Fujian — CEN01 Resistance-type Electric Lubricator CHEN YING
- Gansu — CEN01 Resistance-type Electric Lubricator CHEN YING
- Guangdong — CEN01 Resistance-type Electric Lubricator CHEN YING
- Guangxi — CEN01 Resistance-type Electric Lubricator CHEN YING
- Guizhou — CEN01 Resistance-type Electric Lubricator CHEN YING
- Hainan — CEN01 Resistance-type Electric Lubricator CHEN YING
- Hebei — CEN01 Resistance-type Electric Lubricator CHEN YING
