1. Operation and interval times are PLC-controlled.
2. Includes a pressure gauge for checking operating pressure.
3. A float switch detects oil level and automatically sends a signal.
4. A forced lubrication button (F button) is provided. Do not hold it for more than 3 minutes continuously, to prevent motor overload.
5. Motor thermal protection is provided. At 100°C, the motor stops temporarily for approximately 5 minutes.
6. An optional 1kgf/cm² pressure switch detects damage to the lubrication lines. 7. For float-switch contact details, refer to the float and float-switch features.
8. Refer to the diaphragm pressure switch specifications for contact information.
◆ Dimensions
| Tank Capacity | Tank Material | Length L (mm) | Width W (mm) | Height H (mm) | Mounting hole pitch F (mm) | Weight (kg) |
| 2L | Resin | 224 | 129 | 235 | 145 | 2.70 |
| 2L | Aluminum alloy | 224 | 150 | 225 | 95x200 | 3.80 |
| 3L | Resin | 227 | 167 | 239 | 205 | 3.15 |
| 4L | Resin | 277 | 162 | 250 | 250 | 3.60 |
| 4L | Aluminum alloy | 297 | 170 | 244 | 95x280 | 4.60 |
| 8L | Sheet metal | 355 | 201 | 261 | 95x338 | 7.25 |
◆ Specifications.
| Motor Output Power | 25±3W | |
| Voltage | 110V | 220V |
| Current | 1.8A | 0.9A |
| Frequency | 60Hz | 50Hz, 60Hz |
| Maximum Discharge Rate | 130 cc/min (260 cc/min also available) | |
| Maximum Discharge Pressure | 15kgf/c㎡ | |
| Oil Outlet Size | Ø4 , Ø6 | |
| Float Switch | NC contact (NO contact available) | |
| Pressure Switch | Optional (NC or NO contact) | |
| Applicable Oil Viscosity | 32~68 cSt@40oC (contact customer service for special oil viscosity requirements) | |
◆ Wiring Diagram
 | M: Motor GND: Ground Power: Power Supply Fuse: Fuse DS: pressure switch (optional). WS: Float Switch DK: Forced-feed Button Connect PLC: PLC Connection |
◆ Ordering Code
| Model | Tank Capacity (Material) | Voltage | Oil Outlet Size | Special Requirements | ||||
| CESG01 | 01 | C | 3 | ※ | ||||
| 01 | 2 L (resin) | A | 110V, 60Hz | 0 | Ø4 | PC | Additional pressure switch, NC contact | |
| 02 | 2 L (aluminum alloy) | B | 220V, 50Hz | 1 | Ø6 | PO | Additional pressure switch, NO contact | |
| 03 | 3 L (resin) | C | 220V, 60Hz | 2 | Ø4 (with pressure gauge) | SO | Float switch changed to NO contact | |
| 04 | 4 L (resin) | 3 | Ø6 (with pressure gauge) | Z | Maximum discharge rate 260 cc/min | |||
| 05 | 4 L (aluminum alloy) | |||||||
| 08 | 8 L (sheet metal) | |||||||
Recommended Compatible Products
- Previous: CEV Resistance-type Electric Lubricator
- Next: CEN01 Resistance-type Electric Lubricator CHEN YING
Related Products
CEN01 Resistance-type Electric Lubricator CHEN YING
CESG01 Resistance-type Electric Lubricator
CEV Resistance-type Electric Lubricator
Related Services / service
Regional Products / city
- Anhui — CESG01 Resistance-type Electric Lubricator
- Beijing — CESG01 Resistance-type Electric Lubricator
- Chongqing — CESG01 Resistance-type Electric Lubricator
- Fujian — CESG01 Resistance-type Electric Lubricator
- Gansu — CESG01 Resistance-type Electric Lubricator
- Guangdong — CESG01 Resistance-type Electric Lubricator
- Guangxi — CESG01 Resistance-type Electric Lubricator
- Guizhou — CESG01 Resistance-type Electric Lubricator
- Hainan — CESG01 Resistance-type Electric Lubricator
- Hebei — CESG01 Resistance-type Electric Lubricator
