1. Operation and interval times are PLC-controlled.
2. Includes a pressure gauge for checking operating pressure.
3. A float switch detects oil level and automatically sends a signal.
4. A pressure-regulating valve allows pressure to be adjusted as needed.
5. A special-alloy steel gear pump paired with an induction motor provides stable output pressure and a steady supply of lubricating oil to each lubrication point. Quiet operation and a long service life meet the needs of general large machinery.
6. See the float and float-switch features for contact details.
7. See the diaphragm pressure-switch features for contact details.
8. The following components are optional for models with tanks of 3 L or more:
- An optional pressure switch detects damage to the lubrication lines.
- An optional manual lubrication button provides forced lubrication.
- An optional indicator lights during PLC-controlled lubrication and manual forced lubrication.

◆ Dimensions

◆ Specifications

◆ Ordering Code

A manual lubrication button, indicator lamp and pressure switch can only be fitted to tanks of 3L and above.
Note: Voltage codes D–H are three-phase dual-voltage models, wired for low voltage as standard. Specify high-voltage wiring when ordering if required.

◆ Wiring Diagram

Single-phase Voltage	Three-phase Voltage	M: Motor Power: Power Supply WS: Float Switch

Models fitted with a pressure switch, manual lubrication button and indicator lamp must be wired according to the special wiring diagram inside the CEV lubricator.
※ When connecting a three-phase supply, check the motor rotation direction (the motor shaft is marked with a red dot). If the direction is incorrect, interchange any two supply wires and reconnect.

Recommended Compatible Products