ACFC - S25 - 70 - C20 - E50

     ①  　  ②　  ③      ④       ⑤

 ① ARYUNG Coolant Filter Cabinet type system
② Pump Type
     Gear pump ⇒ G17
     Screw pump ⇒ S20 : AJ-200, S25 : AJ-250
③ Pressure
      G17 ⇒ 20 : 20bar, 30 : 30bar, 50 : 50bar
      S20 ⇒ 30 : 30bar
      S25 ⇒ 70 : 70bar
④ Primary Filtration Specification
     Cyclone filter
     C15 : ARCF-15B
     C20 : ARCF-20B
     C25 : ARCF-25B
⑤ Secondary Filtration Specification / Case Size: 5”, 6”, 8”
     Element Filter : E140 : 140㎛
     Bag Filter(Option) : B25: 25㎛
                                    B50 : 50㎛

 

I Product Features

 • Cabinet-type separate unit
• High-pressure pump
    Gear pump : G17 series
    Screw pump : S20, S25
• Dual-filter configuration
    Primary filter: cyclone filter
Primary cyclone filtration depends on the cutting material. Typically, approximately 95% or more of particles of about 10 μm–2 mm can be recovered, without replacement, for long-term use.
    Secondary filter: element filter or bag filter
The secondary element or bag filter removes suspended material and other particles not captured by the cyclone filter for thorough filtration.
• Dual-tank design: clean tank and dirty tank
 • Built-in dirty pump: ACP-250F (150 L/min, 4 m head)
    Forcibly discharges foreign matter from the dirty tank after cyclone filtration.
• Built-in discharge pressure gauge: 60 / 100 bar
• Discharge pressure switch: 2 bar
    Detects high-pressure pump operation
• Built-in supply pump pressure gauge: 1–3.5 bar
• Optional supply pressure switch: 1 bar
    Detects supply pump operation
• Built-in float switch: high-level ON (overflow alarm)
• Built-in relief valve: adjustment range 5–100 bar
• Casters facilitate moving and installation

 

I Product Specifications

Model Name	ACFC-G17-20	ACFC-G17-30	ACFC-G17-50	ACFC-S20-30	ACFC-S25-70
Motor Power	1.5kW	2.2kW	4.0kW	2.2 / 3.0 kW	5.5kW
Voltage(V)	3Ø 220/380 50/60Hz
Max. Flow rate   [50/60Hz]	23.0 / 28.0 (ℓ/min)	23.0 / 28.0 (ℓ/min)	23.0 / 28.0 (ℓ/min)	227.0 / 34.0 (ℓ/min)	35.5/44.0 (ℓ/min)
Max. Pressure	20bar/2.0MPa	30bar/3.0MPa	50bar/ 5.0MPa	30bar/3.0MPa	70bar/7.0MPa
Relief valve (Pre’  Range)	5-70bar	5-70bar	5-70bar	5-100bar	5-100bar
Standard test  Nozzle	Ø2.0(2.3ℓ/min)	Ø2.0(5.8ℓ/min)	Ø2.0(10.0ℓ/min)	Ø2.0(10.0ℓ/min)	Ø2.0(15.3ℓ/min)
Clean Tank	27ℓ	27ℓ	27ℓ	27ℓ	33ℓ
Dirty Tank	27ℓ	27ℓ	27ℓ	27ℓ	32ℓ
Cyclone Filter	Built in
Dirty Pump	0.25kW (ACP-250F )
Supply In-let	Rc 1" or 3/4"
Discharge Out-let	Rc 1/2"
Dirty Out-let	Rc 3/4"
Drain or Over Flow	Rc 1"
Control Method	External control
Supply Pressure   Sensor	Option
Discharge Pre'   Sensor	Option	Option	Option	Option	Built in
Noise [dB(A)]	80 under	80 under	80 under	75 under	80 under

 

I Dirty Pump Specifications

Model Name	ACP-250F
Motor Power	250 W
Frequency	50 Hz	60 Hz
Power Source	200V / 220V / 380V	220V / 380V
Current	1.5A / 1.4A / 0.87A	1.6A / 0.93A
Discharge Volume	120 ℓ/min	150 ℓ/min
Head	4 m
Out - let	Rc 3/4"

 

I Recommended Supply Pump Specifications

Model Name	ACP-1100HMFS 45
Motor Power	1100W
Frequency	50 Hz	60 Hz
Power Source	200V / 380V	220V / 380V
Current	4.4A / 2.5A	4.8A / 2.8A
Discharge Volume	55 ℓ/min	60 ℓ/min
Head	20/25 m
Out - let	Rc 3/4"

 

I Motor Specifications

Out-put [ Kw ]	Frequency [ Hz ]	Poles [ P ]	Voltage [ V ]	Current [ A ]
1.5	50	4	200 / 380	6.3 / 3.6
	60		220 / 380	6.1 / 3.5
2.2	50	4	200 / 380	8.8 / 5.1
	60		220 / 380	8.3 / 4.8
4.0	50	4	200 / 380	15.2 / 8.8
	60		220 / 380	14.5 / 8.4
3.0	50	2	200 / 380	12.5 / 7.2
	60		220 / 380	11.0 / 6.4
5.0	50	2	200 / 380	24.1 / 14.0
	60		220 / 380	23.1 / 14.0

 

I Pressure / Float Switches (Optional)

Discharge Pressure  S/W	0.5MPa	AC250V 1.7A DC32V 1.7A
Supply Pressure S/W	0.1MPa	AC250V 1.7A DC32V 1.7A
Float S/W  (Clean Tank)	Low Level ON	AC250V 0.33A DC200V 0.5A
Float S/W (Dirty Tank)	High Level ON	AC250V 0.33A DC200V 0.5A

 

I System Front

 

① Discharge Pressure Gauge

② Discharge Out-let

③ Supply Pressure Gauge Relief valve
    •  Maintain supply pump pressure within 1–3.5 bar
④ Relief valve
   • Turn the cap left to remove it, then release the lock nut. Turn the adjustment bolt counterclockwise to decrease pressure or clockwise to increase it.

 

I Circuit Diagram

No.	Component Names
1	High pressure pump
2	1st Filter (Cyclone filter)
3	2nd Filter (Element or Bag filter)
4	Dirty Pump
5	Dirty Tank
6	Clean Tank
7	Pressure Switch_Supply Pressure (Option)
8	Pressure Switch_High Pressure
9	Float Switch_Dirty Tank
10	Float Switch_Clean Tank
11	Pressure Gauge_Supply Pressure
12	Pressure Gauge_High Pressure
13	Air Breather
14	Fluid Level Gauge_Dirty Tank
15	Fluid Level Gauge_Clean Tank

 

No.	DIMENSION
	W	L	H	OUTLET
ACFC-G17/S20	380	860	970	1/2"
ACFC-S25	380	860	1040	1/2"